diy-wood-yarn-color-card-organization-dreamalittlebigger-01

On a StrongGrip Cutting Mat lay down a sheet of basswood. If you have a brayer roll it over the wood to push it into the adhesive on the mat for better hold during cutting. Apply masking tape around all of the edges to hold the sheet down. Be sure NOT to wrap the tape around to the backside of the mat. Using the knife blade in your Cricut Maker, use the Basswood 1/16" setting. This will take a while to cut. I believe it took about 2 hours when I would run 3 cards on a sheet of basswood. So be sure to check before removing the mat from the machine if you'd like to have it run another pass.

On a StrongGrip Cutting Mat lay down a sheet of basswood. If you have a brayer roll it over the wood to push it into the adhesive on the mat for better hold during cutting. Apply masking tape around all of the edges to hold the sheet down. Be sure NOT to wrap the tape around to the backside of the mat.

Using the knife blade in your Cricut Maker, use the Basswood 1/16″ setting. This will take a while to cut. I believe it took about 2 hours when I would run 3 cards on a sheet of basswood. So be sure to check before removing the mat from the machine if you’d like to have it run another pass.